not locking in
Posted: Sun Jul 25, 2004 9:14 am
i've got a 90 mod toyota SR5 IFS auto hubs and there not locking in,i have high and low range but my wheels arn't engaging ,any help would be great
Page 1 of 1
Posted: Sun Jul 25, 2004 9:54 am
so you have checked all the lines to the ADD if so you may have to pull it out and check to see if the yoke is sliding in
Posted: Sun Jul 25, 2004 2:34 pm
had a similar problem with a mates, theres a vacum line running from the engine with what looks like a little filter/non return valve that gets blocked.
Posted: Wed Jul 28, 2004 3:01 pm
Don't get confused with ...hubs... and ADD.
On the SR5 with ADD the hubs are always IN!!!
When you press the button to engage 4WD it is the DIFF that comes in. ADD= Automatic Disconnecting Differential.
check out this webb site for how to check it and fix it
http://www.off-road.com/toyota/tech/add/
AS well, I have a webb site (somewhere) on how to pemanently connect/disconnect the ADD. If you want it, I'll search for it
On the SR5 with ADD the hubs are always IN!!!
When you press the button to engage 4WD it is the DIFF that comes in. ADD= Automatic Disconnecting Differential.
check out this webb site for how to check it and fix it
http://www.off-road.com/toyota/tech/add/
AS well, I have a webb site (somewhere) on how to pemanently connect/disconnect the ADD. If you want it, I'll search for it
not locking in
Posted: Thu Jul 29, 2004 6:54 pm
thanks everyone for your help i found the problem one of the hoses came off at the top of the motor at a little tee piece and filled with dirt i cleaned it out put it back on now everything is sweet 
THANKS AGAIN
THANKS AGAIN