Page 1 of 1
hj60 trans nioses
Posted: Sun Jul 25, 2004 1:12 pm
by da60
Can someone pls help me, I have a hj60 5speed and it has just started to develop a ticking noise which is more noticable when cold and on the over-run and accompanied by a clicking sound every once and a while, my thoughts are this problem is worn mainshaft bearings. The 60 has 250k's does a fair bit of hard off-road work has anyone else had similar symptoms it's only done it for about 60k's since it developed so i'm hoping a bearing kit will fix the prob.
Posted: Sun Jul 25, 2004 3:11 pm
by Ruggers
does it do it with the clutch in or out or both as a nosiey loose throw out bearing will have a knocking noise
Posted: Sun Jul 25, 2004 5:48 pm
by da60
ONLY WHEN THE CLUTCH IS OUT.
Posted: Sat Jul 31, 2004 10:21 am
by Sixty
silly question.....your hubs locked in? Might be the cv's.....
or some prick has put a ziptie on your propshaft....
Posted: Tue Aug 03, 2004 8:36 pm
by da60
hubs unlocked, it is similar in sound to if you try and engage 4wd without the front hubs locked in, if you have ever made that silly mistake (i have) but slower. Does anyone know what type of sound worn mainshaft bearings make?
Posted: Sun Aug 08, 2004 12:25 pm
by Sixty
sounds like it could be the throwout brg