Outer Limits 4x4 Board

G'day all,

I've been reading up on the lack of lockers for the front 7.25" diff.

But i have also noticed the IO boys have fitted front and rear Kaiser lockers and their front is a 7.25.

This link has some tech in it:

http://www.pajerio.com/forum/front-r...hos-interested" onclick="window.open(this.href);return false;

I could be well off, and yell me down if i'm wrong but can anyone see any issues?

Might be a way of keeping the 5.29's without swapping diffs?

Cheers

Good find, i'll run some part numbers through the
Mistu parts program

Awesome, thanks

I sent my friend (lordtrunks on these forums) a text. He confirmed that the manual trans iO uses the same ring carrier as the 4 cylinder montero and 3.0 gen 2. So if the Kaiser locker is for that same diff it will work, the mitsu part number is MB393001 for the 7.25 carrier.

Big thanks to LT for doing the leg work, if you can confirm that the locker fits the manual trans iO 7.25 i think we'll be set.

Sweet - one of the fellas on the io forum is trial fitting a set of 5.29's to his io and has front and rear kaiser lockers to go in as well.

Will post up what he finds out.