Page 1 of 1

putting ford xf Ute leaf sprints in a hilux

Posted: Sun Jan 13, 2013 12:37 am
by Hiluxpower
Well you need to redrill the center bolt back a bit then move the back chassis mount back till it's flat on the chassis has to be custom made out off 4mm rhs teel cause there 65mm wide not 60 and use u bolt flip kit and 200mm shackles and you to can get out there in the hilux if done right beat some off. Them mates in the potrols :finger: :smilecolros:

Re: putting ford xf Ute leaf sprints in a hilux

Posted: Sun Jan 13, 2013 8:10 am
by brad 93hilux
:roll:

That was a little hard to read.

The way it reads is
- you are putting falcon springs in a hilux by redrilling the springs
- chassy has to be custom made out of 4mm rhs steel
- they are 65mm wide not 60 with flip up kits and 200mm shackles
- and you beat off your mates with patrols? :crazyeyes:

Mmm.. Possibly need to read before positng or after and edit it..

Re: putting ford xf Ute leaf sprints in a hilux

Posted: Sun Jan 13, 2013 12:01 pm
by -Scott-
Yes, a little hard to read, and belongs in Toyota, not General.