Page 1 of 1
gigglepin hell fires
Posted: Mon Feb 04, 2013 7:41 pm
by Jive
does anyone know if the hell fire gears fit a standard 8274 or just the gp80 series winches???
Re: gigglepin hell fires
Posted: Thu Feb 07, 2013 6:55 am
by XTREME MMM
Jive wrote:does anyone know if the hell fire gears fit a standard 8274 or just the gp80 series winches???
I am quite sure both.
Re: gigglepin hell fires
Posted: Tue Feb 26, 2013 1:44 am
by MogLux
Jive wrote:does anyone know if the hell fire gears fit a standard 8274 or just the gp80 series winches???
Jive
PM Smithy jnr on here he is the gigglepin agent in Australia and was navi for them in KOH 2013 ... Wayne is a top bloke and will surely answer any questions you have..
http://www.smithiengineering.com.au" onclick="window.open(this.href);return false; or email him on
wayne@smithiengineering.com.au
only just sore this post..
Matt
Re: gigglepin hell fires
Posted: Mon Mar 04, 2013 7:26 am
by Smithy jnr
Test fitted the Hellfires to a standard Warn 8274 on the weekend, and yes they do fit.
However the fit over the Warn gear in the top housing is a little loose, it has about .5mm play between the original top housing gear and the Hellfire adaptor.
I then tried it out on the GP +25% gearset, that are made to fit the standard Warn gearbox top and it is a perfect fit, no play between the top gear and the adaptor at all.
So if you are thinking about fitting a set of Hellfire ratios, my recommendation would be to fit the GP+25% ratios to the top housing at the same time
, (as you have to press the shaft out of the top housing anyway). It would make for a very quick single or in-line motor winch(flamin fab style).
Re: gigglepin hell fires
Posted: Mon Mar 04, 2013 7:54 am
by WICKED
What's that combo worth smithy?
Re: gigglepin hell fires
Posted: Mon Mar 04, 2013 6:15 pm
by evanstaniland
WICKED wrote:What's that combo worth smithy?
X2
Re: gigglepin hell fires
Posted: Thu Mar 07, 2013 7:28 pm
by GUtripper
So Bow have launched the Bow3 motor...... Rated at 9 HP.
Mmmmmmmm.
Details Smithy?