Outer Limits 4x4 Board

Hi, somebody here has a ute in the drive way .
Need the measurement from the front bumper to the rear of the back tyres.
Trying to see if a ute will fit inside a tipper body we have to sort some transport

Any help be great

4120mm O/A from very front of bullbar to rear of back tyre. excluding winch roller fairlead..
front of bullbar, that would add at least a 100mm, if you didnt have one.
and i run 33 inch tyres..

That's what I was after, tray body is 4200 long so will fit on with a bit left. Chassis can over hang
Thanks for your help