Page 1 of 1
L28 Tuning specs.
Posted: Mon Jul 26, 2004 11:06 pm
by giffo
Can someone tell me what are the tuning specs for MQ L28 petrol.
Timing???
Points setting???
Where can I get a Servive manual for a MQ L28 patrol?
Giffo
Re: L28 Tuning specs.
Posted: Mon Jul 26, 2004 11:13 pm
by bogged
giffo wrote:Where can I get a Servive manual for a MQ L28 patrol?
Giffo
maybe
www.pitstop.net.au they do most manuals
Thanks
Posted: Mon Jul 26, 2004 11:19 pm
by giffo
Thanks Bogged,
Good Man
Giffo
Posted: Tue Jul 27, 2004 5:14 pm
by shortgq
timing 8degrees at 650rpm and point gap .45 to .55mm gap
Posted: Tue Jul 27, 2004 5:27 pm
by ozy1
Valve Clearance HOT
Intake - 0.25mm
exhaust - 0.30mm
Engine Oil Cap with filter change
-4.4L
Cooling system cap with heater
- 10.8L
Radiator Cap Relief Pressure
-88 KPA
Compression Pressure
standard - 1177 KPA
minimum - 883 KPA
Ignition Timing and idle speed
- 8 degrees at 650 RPM for manual trans
- At Idle Co % 2.0
Point Gap
-0.45 to 0.55mm
Dwell Angle
- 35 degrees to 41 degrees
Spark Plugs STANDARD
-BP6ES
-0.8 to 0.9mm
High Tension cables (leads)
-Resistance less than 30000 ohms
Thanking You
Posted: Tue Jul 27, 2004 5:38 pm
by giffo
Thanks for the detailed replies.
I'll see what money I can grab from the missus. I wonder where she hides her purse now?? Mmmmm.
Giffo
Posted: Tue Jul 27, 2004 6:23 pm
by skippy's GQ
YOU CAN GET GENUINE NISSAN MANUALS FOR THE MQ'S.
FROM NISSAN
COST'S ABOUT $90. THERE WORTH THE MONEY.
Posted: Sun Aug 27, 2006 10:33 am
by mightymav
could someone tell me the firing order of the L28
thanks.
Posted: Sun Aug 27, 2006 1:07 pm
by Beastmavster
From memory it's 1-5-3-6-2-4.
I dont have a manual to help you with, but if you try that I'm sure you'll hear if it's wrong straight away.
Posted: Sun Aug 27, 2006 7:07 pm
by mightymav
Beastmavster wrote:From memory it's 1-5-3-6-2-4.
I dont have a manual to help you with, but if you try that I'm sure you'll hear if it's wrong straight away.
yer thanks for that we got it going
thanks brett