Page 1 of 1
boost compensated IP on to 2.8 (3L) engine
Posted: Mon Mar 11, 2013 10:58 am
by slythoughtz
Hey guys, I have a boost comp injector pump I want to install onto my 3L engine. I've been trying to find out where the 2nd line would go to coming off the compensator. I know one tees into a boost pressure line but I'm not too sure about the other one. I've circled the on in a pic below.
Re: boost compensated IP on to 2.8 (3L) engine
Posted: Sat Apr 06, 2013 2:22 pm
by Hilux_Ryan
I know its old, but pretty sure that is the bleed return line from the injectors. It appears to go into the same banjo fitting as the return line to the tank?
Re: boost compensated IP on to 2.8 (3L) engine
Posted: Sat Apr 06, 2013 8:40 pm
by slythoughtz
Tired running it. Found it was just the underside of the boost inlet top bit. So just vents to air. Wasnt sure where it went to but was told to just leave it. Then the pump didnt end up working anyway so it got canned. Put a non turbo injector pump on and it fired up straight away ffs haha