which cradle.
I have just gone and purchased a new to me winch for the paj .. I do not have a winch compatible bullbar ( alloy bar ) , and I dont have any real desire to go out and buy a steel one as adding a winch is enough weight over the front end at this point ( I have ordered some synthetic rope as well ).
The winch already has a mounting plate attached to it. .. How hard would it be for a reasonably mechanically competent bloke with a chop saw, welder, shed etc to mount the winch up in a satisfactory manor .. and not have it tear off when used in anger. ...
anyone have any pics of a which mount that they have done on a paj ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Winch mount on an NL.
Moderator: -Scott-
Winch mount on an NL.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 1 guest