arb comp and solenoid wiring
Posted: Mon May 27, 2013 7:05 pm
hey guys i need to wire up my compressor and locker solenoids through 2 position switches.
Am i on the right track with this loom
Am i on the right track with this loom
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
arb comp and solenoid wiring
Page 1 of 1
Re: arb comp and solenoid wiring
Posted: Mon May 27, 2013 8:30 pm
That doesn't have any "interlocking" of the lockers i.e. each can be operted independently of the other. If this is what you're after then it looks good to me.
Re: arb comp and solenoid wiring
Posted: Mon May 27, 2013 8:36 pm
That is what I was chasing so I can use cutting brakes. Thank you very much for verifying
Re: arb comp and solenoid wiring
Posted: Sat Jun 01, 2013 3:44 am
if your using the compressor alot, keep an eye on the terminals at the compressor END..
ive had mine melt, on the current single compressor, and the OLD SCHOOL compressor.
same spot.
ive had mine melt, on the current single compressor, and the OLD SCHOOL compressor.
same spot.