Anyone have a design /plans for a Prado rear bar - TX with flairs, so it needs to match the contours on the corners.
I rolled mine off going down Monkey Gum on Saturday, popped the clips and bent the lower bolt brackets. Easily fixed but it's not held on by much, so an upgrade is warranted.
Looks like it might be time to break out the cardboard templates again for another Roktruk special. The 80 series bar I built served many faithful years and took a fair hammering during its life.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
95 series Prado rear bar
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 1 guest