Hi
I just bought a v6 120 series Prado 5 speed auto and am wondering people's thoughts on a modest suspension upgrade. I want to set the car up for touring (first trip will be Cape York). I am leaning towards 2 inch lift with bilstein shocks and lovells springs.
Just wondering what other people's thoughts and experience is?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
120 Prado suspension question
Moderators: toaddog, Elmo, DUDELUX
Re: 120 Prado suspension question
Have a look in the members builds section of the forum. BradHilux has a Prado he just took to the Cape. I think he blew out a rear shock during hi travels, so maybe check what he has, and go from there.
MrsForby wrote: Oh I desperately truly love the taco.
Re: 120 Prado suspension question
Yeh I put a superior engineering 4" lift under mine with 285/70 r17 BFG km2's (33's) and went and did the cape and gulf
But yeh we had a ball and did all the harder stuff there without any problems, the shocks are remote reservoir profender shocks and were really great there on the long runs of hard corrigations and dips, i did blow a remote res line only because it was touching the chassy rail and wore through the rubber and steel braid and wore a hole in it.
Make sure you check your bump stops will dampen your suspension and stop it from bottoming out as you will need it up there as i extended my bump stops and was slamming down hard on them up there.
Brad
But yeh we had a ball and did all the harder stuff there without any problems, the shocks are remote reservoir profender shocks and were really great there on the long runs of hard corrigations and dips, i did blow a remote res line only because it was touching the chassy rail and wore through the rubber and steel braid and wore a hole in it.
Make sure you check your bump stops will dampen your suspension and stop it from bottoming out as you will need it up there as i extended my bump stops and was slamming down hard on them up there.
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: 120 Prado suspension question
You will do most of the stuff up there on 2" lift but i wanted to fit 33's and have a bit more clearance.
Checkout prado point as there is heaps of info on there
Checkout prado point as there is heaps of info on there
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: No registered users and 0 guests