Outer Limits 4x4 Board

urgently need exact sizes for 2 inch body lift for 1993 LN106R dual cab hilux diesel. im going to buy the stuff now. and i already have the nylon.

1. how many bolts
2. lengths / widths
3. type of bolt
4. nuts, washers etc
5 anything else i forgot.

thanks team

De-lux wrote:urgently need exact sizes for 2 inch body lift for 1993 LN106R dual cab hilux diesel. im going to buy the stuff now. and i already have the nylon.

1. how many bolts
2. lengths / widths
3. type of bolt
4. nuts, washers etc
5 anything else i forgot.

thanks team

1. NFI
2. Get metric - the rest of your car will be. When I fronted to buy bolts I asked for "M10" and he came back with 3/8 UNC - because he measured one of my original bolts at a fraction under 10mm.
3. Grade 8.8 or better
4. Nyloc nuts or spring washers + original washers from the car
5a. Queensland Transport will ping you for nylon lift blocks unless they have a metal crush tube.
5b. They'll also ping you for lifting more than 50mm.
5c. Make sure the blocks are at least as large (diameter wise) as the original rubbers/whatever is in there - if you go smaller you concentrate the load and risk cracking the floor.

Good luck,

Scott

60mm diameter everywhere except the two front mounts 50mm diameter
NJ SWB said it all.

And look for the other points that the body rests on and lift then accordingly using rhs or whatever is handy, also saves cracking of the body but , most people overlook it