Outer Limits 4x4 Board

Hey guys
I have a 99 Gu coil cab ute with a 5'' lift all round. superior engineering aftermarket radius arms upper and lower control arms draglink panhards etc etc. Im looking at installing a 2-3'' lift due to being hassled by the Poolice to much as atm I have no sway bars and my front radius arms havnt been drilled and tapped to allow them, Plus I don't use my ute for 4wding much anymore. Mate has all his standard suspension off his gu4 wagon, So im wondering if it will all fit in mine? Mainly the front radius arms and the lower control arms? I know the front panhard wont but I still have the original off my ute only reason I don't have my front radius arms is due to one of them being bent when I purchased the car so I chucked them both.
Any information in the right direction is greatly appreciated before I remove everything and realize nothing fits!!!
Cheers Tim

Yes it will fit.

Panhard rods will not fit, keep them for your Ute.
You will need a different steering damper bracket for the drag link for the Series 2+ GU Wagon.
Steering damper is different.
Springs will work, nothing a coil spacer won't fix if it doesn't sit perfect.
Shocks will work.
Upper and lower trailing arms will work.
You can tap the superflex arms to mount the sway bar spacer brackets that you could purchase or make.

Radius arms for your Patrol , either grab a pair from the wreckers or I could sell you a set to suit the 2 or 3" lift for $850 which includes the front radius arm bushes and an extra $120 if you need the set of 4 mushroom bushes (genuine). They will be powder coated black so the cops shouldn't bother you.

Shane
Suspension Stuff