I have a 1992 Range Rover and it's all over the road. I have a 2-1/2 inch bodylift, 2 inch suspension lift.
I have off centred bushes in the front trailing arms. I spoke to LRA Automotive and they suggested that I realign the swivel-balljoint which would bring the diff back to factory standard.
Does anyone know of a kit that I can install to realign the diff to factory standard angle?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1992 Range-y all over the road
Moderator: Micka
Re: 1992 Range-y all over the road
If you rotate the swivel balls makes sure to remove the castor bushes. Have the castor bushes been installed correctly?
Check the rear trailing arm bushes as well.
Check the rear trailing arm bushes as well.
Re: 1992 Range-y all over the road
or the rear trailing arms in general, i've broke and bent a few.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Who is online
Users browsing this forum: No registered users and 1 guest