Page 1 of 1
Toyota 100/80 -5 stud
Posted: Fri Jul 30, 2004 9:07 pm
by Dozoor
Any body know the Pcd on the 100/80 series 16x8 5 stud steel rims ?
its a bigger circle than the 6 stud which is 6 on 5-1/2 i think.
Posted: Fri Jul 30, 2004 9:56 pm
by dumbdunce
150mm - it's only 78/79/100/105 series, 80 series in 6 on 140 (5.5") same as patrol and earlier cruisers.
Posted: Fri Jul 30, 2004 10:52 pm
by Dozoor
Thanks DD ,
I thought they where larger just not quiet enough hehe-
wonder if the studs are 8 mm or 10mm,
Just toying , wouldn,t mind a set of 16x 8s for my project , for my silverstones , Rover axles so the pcd 5 on 165 -
The rover uses around a 15 mm stud --
That leaves 5mm of the existing hole mmmm.........
pretty easy to get the five stud ones .
Posted: Fri Jul 30, 2004 11:06 pm
by dumbdunce
Dozoor wrote:
wonder if the studs are 8 mm or 10mm,
Just toying , wouldn,t mind a set of 16x 8s for my project , for my silverstones , Rover axles so the pcd 5 on 165 -
The rover uses around a 15 mm stud --
That leaves 5mm of the existing hole mmmm.........
pretty easy to get the five stud ones .
the rover steel wheels are pretty flat on the mounting flange aren't they? re-drill them for toyota 5 on 150mm rotated 36 degrees from the rover holes. most (all?) toyotas use 12x1.25mm studs.
Posted: Sat Jul 31, 2004 9:44 am
by Bush65
100 series wheel studs are 14mm
rangie wheel studs are 16mm