Page 1 of 1
Tricks for fitting air locker?
Posted: Mon Aug 02, 2004 11:44 am
by 82 Lux
Anyone got any tips or tricks to share in regards to fitting an air locker to a early lux diff centre
Posted: Mon Aug 02, 2004 11:49 am
by bazzle
http://www.4x4wire.com/toyota/tech/arb_locker/
A simple Google search found the above (arb locker fitting)
Bazzle
diff
Posted: Mon Aug 02, 2004 11:54 am
by 82 Lux
Cheers Bazzle
Posted: Mon Aug 02, 2004 5:10 pm
by spazbot
pay somone to do it so you get all your backlash etc set right, so you dont trash the ring and pinion the first time you go out
Posted: Mon Aug 02, 2004 7:39 pm
by Cliffy
The first and only tip that I have is to chuck the ARB air line in the bin
The problem is that it is 5mm air line, which is impossible to get appart from ARB.
Go to the nearest hydraulic/pnumatic shop and purchase 1/4" or 6mm ariline and fittings. As this is far more common than the standard ARB line, and cheeper.
You can also purchase push on joiners, which are great for 'bush' repairs when the air line gets piched or ripped off.
Just my $0.02