Page 1 of 1
detroit ez-locker (different question)
Posted: Thu Aug 05, 2004 4:41 pm
by stumped
go to da bottom for new question...
old question wrote:i've been told that you can replace the pins in a the ez-locker... does anyone know if there's still an australian distributer for the detroit ez-locker?
i picked up a locker 2nd hand, pins are stuffed, considering if they can be replaced, or if i gotta get my $$ back...
Posted: Thu Aug 05, 2004 6:41 pm
by xtreem
Hey Stumped, I believe the ezi locker and the lock right use the same pins? So they should be readly available here. Only about $10 or $15. I think.
Posted: Thu Aug 05, 2004 6:50 pm
by xtreem
The pin kits that spidertrax sell for US$12 fit both powertrax lock right and Ez Locker. If you want to get rid of the locker let me know, i'm about to order a new one from the states.
Posted: Thu Aug 05, 2004 7:47 pm
by No Idea
Opposite lock sold them last year... could still be selling them now?
Posted: Thu Aug 05, 2004 9:33 pm
by bigsteve
I tried opposite lock for pins and had no luck.
Total 4wd in melbourne ordered mine in.
Steve
Posted: Thu Aug 05, 2004 10:12 pm
by stumped
opplok gave up on auto lockers a while back....
anyone in aus still stock them? know any shops in nsw that can help me out? will ring around a bit tomorrow, and see what the go is
so with these pins breaking, what are the chances of the rest of the locker being damaged?
Posted: Thu Aug 05, 2004 10:30 pm
by xtreem
The pins are designed to break, before anything else gets damaged
Posted: Mon Aug 09, 2004 5:23 pm
by stumped
yeah, still on that topic again
looking at getting replacement pins possibly, just not 100% sure if a kit will replace everything.. what comes in a locker kit?
have got the two halves, 3 rods, 4 shims, 4 pins (one broken), springs. also have 2 small pins that kinda look like plugs... these are the things i'm wondering 'bout now, cos it sounds like they don't get replaced in the pin kit.
is this all that comes with a locker? will try and post pics later if i get a chance
Posted: Mon Aug 09, 2004 6:18 pm
by stumped
here be pics
is this a whole kit? does anyone have pics and/or instructions?
there's 4 pins, one of which is broken and stuck in locker, trying to get it out. there are 4 springs, two are alright, two are broken and on two of the plug things. the 4 small lumps are what i call plugs, they have a shoulder on one end of them....
anyone know if a pin kit will come with these plug ones? cos the shoulder is broken off one...
Posted: Mon Aug 09, 2004 7:44 pm
by zookjedi
not sure about the kit but one was missing in my mate new locker kit and we wanted it going that weekend so couldn't wait another week so i took one of the other ones to a machining shop and got them to make me one, it cost me $20 but at least we got it all in and going for me mate by the week end
Posted: Tue Aug 10, 2004 11:26 am
by stumped
thanks dude...
bump... anyone else?? i KNOW some of you have auto-lockers, and the detroit is almost identical to lock-rite etc... so info/instructions etc from any of them would be good!!
Posted: Tue Aug 10, 2004 11:38 am
by k44rll
is this any good to you?
http://www.richmondgear.com/0002pdfs/1000702MIA.pdf
i've just answered my other thread
Karl
Posted: Tue Aug 10, 2004 11:46 am
by Liam
We have them in stock.
Posted: Tue Aug 10, 2004 12:22 pm
by stumped
thanks dude, that's useful... shame 'bout the pic quality tho eh!
Posted: Tue Aug 10, 2004 12:29 pm
by stumped
Liam wrote:We have them in stock.
which do u have in stock liam? the pin replacement kit, or the whole locker?
do u know what's in the pin kit? after reading that pdf i'm confused as to which are the pins - the small rods, or the small plug-like things. i need both either way...
any more info and answers u can give would be good!!
Posted: Tue Aug 10, 2004 1:00 pm
by Liam
We have pin and spring kits in stock ( as well as a sheet load of lock rights) Ezi lockers takes the same spring and pin kits as their equivilent lock rights)
Posted: Tue Aug 10, 2004 1:06 pm
by DeWsE
Liam wrote:We have pin and spring kits in stock ( as well as a sheet load of lock rights) Ezi lockers takes the same spring and pin kits as their equivilent lock rights)
What sorta cost Liam?
Posted: Tue Aug 10, 2004 2:20 pm
by stumped
stumped wrote:Liam wrote:We have them in stock.
do u know what's in the pin kit? after reading that pdf i'm confused as to which are the pins - the small rods, or the small plug-like things. i need both either way... does the kit have both?
Posted: Tue Aug 10, 2004 2:29 pm
by Liam
Cost is $30 for the pin and spring kit.
Posted: Tue Aug 10, 2004 2:37 pm
by stumped
stumped wrote:stumped wrote:Liam wrote:We have them in stock.
do u know what's in the pin kit? after reading that pdf i'm confused as to which are the pins - the small rods, or the small plug-like things. i need both either way... does the kit have both?
liam...??? what's in the kit? do ya have any pics or links?
Posted: Wed Aug 11, 2004 10:54 am
by stumped
bump.. liam, anyone?