Page 1 of 2
New Buggy
Posted: Mon Aug 09, 2004 10:31 am
by lil86
Anyone hear about the rockcrawler buggy that Rhino buggies was going to produce? Well the proto type was bought by my cousin i'll try and get some pics up on here soon. its looking very cool, modified lotus 7 chassis, MQ running gear and 4 link coilovers! bet u wont believe wat its cost him so far!
Posted: Mon Aug 09, 2004 10:59 am
by sierrajim
well? more infor please
Posted: Mon Aug 09, 2004 11:02 am
by bubs
is the buggy at rhino buggies, there factory is 1km from work
Posted: Mon Aug 09, 2004 11:47 am
by Fieldsy
Their was something on their website about it but I don't think it has been updated in ages. I was going to post something about this a while back but thought I would get smashed by the Tonka nazizs

Posted: Mon Aug 09, 2004 7:06 pm
by spazbot
so how much he spent , does it drive and when will he be competing in it ?
Posted: Mon Aug 09, 2004 8:00 pm
by N*A*M
spill the beans. we hate secret squirrels.
Posted: Mon Aug 09, 2004 8:27 pm
by NICK
post pics.
NICK
Posted: Mon Aug 09, 2004 10:23 pm
by Fieldsy
this thred is useless without pic's
their it's been said

Posted: Tue Aug 10, 2004 10:48 am
by lil86
yes it was at rhino but we picked it up on friday started cleaning up the chassis but went to winch challenge over the weekend (very crazy stuff, did anyone get out there??) so it hasnt progressed much. at this stage engine g/box and transfer are in the chassis, rear 4 link is set up waiting for $$ to buy coilovers and the front suspension still has to be sorted. pics are comeing but i dont have a digital camera and the buggy isnt at my house anyway.
Posted: Tue Aug 10, 2004 11:05 am
by Fieldsy
so i asume that they never finished thus the buggys will not go into production is that right?
Posted: Tue Aug 10, 2004 11:20 am
by lil86
yeh it was their prototype and they decided that is wasnt profitable enough when compared to their lotus 7 and hummer kits. it should cost about half ruffs budgie when finished

Posted: Tue Aug 10, 2004 12:33 pm
by bj56
i have done the panle work on one off the hummer kits and they are pritty ruff i hope they built there buggy bete rtook me 3 days to get the bonet on and pnales to gap on one off there kits it had gq chassis and running gear nice car in the end tho
Posted: Tue Aug 10, 2004 12:51 pm
by Timmy
bj56 wrote:i have done the panle work on one off the hummer kits and they are pritty ruff i hope they built there buggy bete rtook me 3 days to get the bonet on and pnales to gap on one off there kits it had gq chassis and running gear nice car in the end tho
was that the black one here in redcliffe BJ?
Posted: Tue Aug 10, 2004 6:16 pm
by RUFF
lil86 wrote:yeh it was their prototype and they decided that is wasnt profitable enough when compared to their lotus 7 and hummer kits. it should cost about half ruffs budgie when finished

So just out of curiosity how much do you think half of what i spent on mine would be?
Posted: Tue Aug 10, 2004 6:31 pm
by NICK
RUFF wrote:lil86 wrote:yeh it was their prototype and they decided that is wasnt profitable enough when compared to their lotus 7 and hummer kits. it should cost about half ruffs budgie when finished

So just out of curiosity how much do you think half of what i spent on mine would be?
twice that of half of nothing
but i do find it hard to believe that it can be done for less than you spent, on a side not complete Mq running gear is only work 400 bucks so there is a saving compared to the hilux running gear,
NICK
Posted: Tue Aug 10, 2004 9:09 pm
by POS
NICK wrote:RUFF wrote:lil86 wrote:yeh it was their prototype and they decided that is wasnt profitable enough when compared to their lotus 7 and hummer kits. it should cost about half ruffs budgie when finished

So just out of curiosity how much do you think half of what i spent on mine would be?
twice that of half of nothing
but i do find it hard to believe that it can be done for less than you spent, on a side not complete Mq running gear is only work 400 bucks so there is a saving compared to the hilux running gear,
NICK
Yes, but will it be anywhere near as capable??????
Posted: Wed Aug 11, 2004 8:19 pm
by bj56
na timmy it is a custom couler dont know that its called it changegs all diffrent colurs and all diffrent tints not ya normal carmilian and its got a gq patrol chassys and diffs 5 leter commy motor did they only make the 1 buggy lil i have seen oen there and iam gessing it is it looked good
Posted: Wed Aug 11, 2004 8:33 pm
by POS
Posted: Wed Aug 11, 2004 8:48 pm
by Shorty40
Posted: Wed Aug 11, 2004 8:48 pm
by Fieldsy
bj56 wrote:na timmy it is a custom couler dont know that its called it changegs all diffrent colurs and all diffrent tints not ya normal carmilian and its got a gq patrol chassys and diffs 5 leter commy motor did they only make the 1 buggy lil i have seen oen there and iam gessing it is it looked good
OK then
EDIT; Ok now i got it ya gota read his post b4 that

doh time for me to go to bed i think
Posted: Thu Aug 12, 2004 7:53 am
by lil86
well i was just goin of the members section where it says u hope to have it complete for under 10k. well this one should be done in around 5k

how capable? the rear should have at least 3 foot of travel. update: looking at commadore v6 and auto..... more balls
Posted: Thu Aug 12, 2004 9:54 am
by N*A*M
still a distinct lack of pics
Posted: Thu Aug 12, 2004 10:55 am
by bj on roids
will it have airlockers for under $5k?
wheres the pictures?
Posted: Thu Aug 12, 2004 11:34 am
by lil86
read above no digital camera yet. ill post em wen i get some. no airlockers welded front and back i think he's doing. oh yeh forgot to mention its already got hydrolic steering too.
Posted: Thu Aug 12, 2004 6:03 pm
by spazbot
what coil overs for under 5k as 4corners of coilovers will cost atleast 3k
Posted: Thu Aug 12, 2004 6:44 pm
by DaveS3
It would be good to see some costings...
Under 5k....

Posted: Thu Aug 12, 2004 9:26 pm
by NICK
spazbot wrote:what coil overs for under 5k as 4corners of coilovers will cost atleast 3k
i sold some prado coil overs today, 110ea. they would be as good as mq diffs

Posted: Fri Aug 13, 2004 6:58 am
by Fieldsy
NICK wrote:spazbot wrote:what coil overs for under 5k as 4corners of coilovers will cost atleast 3k
i sold some prado coil overs today, 110ea. they would be as good as mq diffs


now we will have every soft roader saying things like " My x-trail is hard core coz it has coil overs "
just reply with a

Posted: Fri Aug 13, 2004 8:01 am
by 1MadEngineer
is this the one with subaru coil overs
the guy who built it told me he got heaps of tech advice from one of the OL founders (can't say who ) but when i finally stopped laughing, i concluded that if he was given any ideas to help the design -
HE DIDN'T LISTEN
Not too late to fix, just copy the Haultech buggies they work awesome.
Posted: Fri Aug 13, 2004 7:37 pm
by RUFF
lil86 wrote:yes it was at rhino but we picked it up on friday started cleaning up the chassis but went to winch challenge over the weekend (very crazy stuff, did anyone get out there??) so it hasnt progressed much. at this stage engine g/box and transfer are in the chassis, rear 4 link is set up waiting for $$ to buy coilovers and the front suspension still has to be sorted. pics are comeing but i dont have a digital camera and the buggy isnt at my house anyway.
So it has no Coil Overs currently Fitted? But he is going to build this including what he paid for it for less than $5000?
Has he even looked into what coil overs cost? Even cheap Rancho Coil overs are going to cost around the $4000 mark for 4.
Has it got Tyres or beadlocks? And what is he going to do for reduction gearing? I cant see him even finishing what is needed for less than $5000.
So what did he pay for it?