Page 1 of 1
WHat does an MQ LSD look like
Posted: Tue Aug 10, 2004 8:49 pm
by ozy1
Got a centre the other day, and its got a different sentre than im used to seeing, what can you guys tell me that will determine weather or not its LSD or what not, have a pic, but its not the best
Shawn
Posted: Tue Aug 10, 2004 10:20 pm
by berazafi
need to see the other side of the crownwheel
Posted: Wed Aug 11, 2004 12:49 am
by XterraGuy
Blah, that's a truly lousy picture, hardly worth posting.
I took these pictures when working with my H233B LSD, the MQ should be quite similar:
http://mywebpages.comcast.net/xterra/tech/LSD
Probably the most obvious thing to look for to tell if it's an LSD vs. an open 4-pinion is the two holes at each end of the case parallell to the axle shaft input where the "ears" of the clutch pack engage the case. Best seen in pics #9 and #11 for reference, but also visible externally.
Brent
Posted: Wed Aug 11, 2004 6:17 am
by ozy1
mate, thanks for that, it looks exactly the same, that what i wanted. the pic was shit, had the flash on, oil evry where, shit lighting around myself, and i had a poor resolution settin on the cammer, need to adjust it
Posted: Wed Aug 11, 2004 7:21 pm
by Screwy
looks like u scored mate
