Page 1 of 1
GQ center in GU housing?
Posted: Wed Aug 11, 2004 6:27 pm
by givathafat
We are looking into getting a gu front diff for the tomato and was wondering if the gq center will.
1. bolt into the housing,
2. fit the Gu Cv's.
3. Gq manual hubs fit instead of gu auto ones.
Thanks
Dave Crook
Re: GQ center in GU housing?
Posted: Wed Aug 11, 2004 11:21 pm
by turps
givathafat wrote:We are looking into getting a gu front diff for the tomato and was wondering if the gq center will.
1. bolt into the housing,
2. fit the Gu Cv's.
3. Gq manual hubs fit instead of gu auto ones.
Thanks
Dave Crook
GQ hubs fit GU's
GQ airlocker will fit into and work in a GU fron with mods. Not sure what they are, but think it is new bearings (due to bigger axle - I lied sorry, read below) and something else
GU CV's take alot of pounding before they brake.
Posted: Thu Aug 12, 2004 7:13 am
by Wendle
just swap the whole centre, carrier and all. the differences are in the crown wheel fitting, which won't worry you if you swap the whole lot.
GU axles aren't bigger, they are the same as GQ, 32mm 31 spline inner and outer.
Posted: Thu Aug 12, 2004 7:39 am
by givathafat
thanks for that ,
I think that's the way we might go
