Page 1 of 1
Home made swaybar disconect
Posted: Mon Feb 24, 2003 2:41 pm
by KIWI
Found this interesting front swaybar disconect.
[url]offroad.com/toyota/cheaptricks/swaybar2[/url]
Hope this works.
Dave
Posted: Mon Feb 24, 2003 6:47 pm
by Westoztroopa
Looks pretty simple. I'm still going with the Articulator though...
Noel
Posted: Thu Feb 27, 2003 3:53 pm
by KIWI
heres another one, not so "homemade" though.
http://www.rockstomper.com/catalog/suspen/discon
Dave
Posted: Thu Feb 27, 2003 10:07 pm
by Westoztroopa
So which type is your front swaybar disconnect Dave? Is it like the ones above or like the Articulator?
Noel
articulator
Posted: Fri Feb 28, 2003 12:31 am
by dinos4x4
hello noel
just remember when you get a articualor as soon as you a ready to go offroad take the pin out because i have snapped 2 pins from forgetting to take the pin out then going over rough terain.
Posted: Fri Feb 28, 2003 6:32 pm
by KIWI
Same as ones above, still not on vehicle yet.
Seemed to be the easiest to install and use, interested to hear what your thoughts on articulator are.
Mine cost $45, which seemed good for the improvement it is supposed to make.
Re: articulator
Posted: Fri Feb 28, 2003 7:20 pm
by Westoztroopa
djspajero wrote:hello noel
just remember when you get a articualor as soon as you a ready to go offroad take the pin out because i have snapped 2 pins from forgetting to take the pin out then going over rough terain.
Thanks for the advice Dino. Will be a while before I actually get it and install it but will keep that in mind.
Articulator is a fair bit more than that Dave, but looks well made and should last a while (apart from the pin that is :wink: ).
Noel
Posted: Fri Feb 28, 2003 7:58 pm
by CJ Burns Esq
So what is an Articulator?
CJ
Posted: Sun Mar 02, 2003 6:48 pm
by Westoztroopa
The Articulator is a quick release swaybar disconnect made by Bitsamissin (Frank) and his mate... It was originally designed for the Pajero, but should be fairly easily adaptable to other IFS designs. I have ordered one but it wont be ready for a while and I wont have time to put it in for a while anyway...
Here's the site
http://www.peppernet.org/articulator/
See also original thread in GMH/Isuzu main menu.
Cheers,
Noel