Page 1 of 1
Hub diameters and f100/f150 rims
Posted: Thu Aug 12, 2004 1:16 pm
by nicbeer
Hey all
Going down to look at some rims toomorrow. Is there a difference between the sierras in regards to hub diameter?
From what I know, the jeep rims are sometimes different hub sizes but all the f150/f100 rims are the same and bolt straight on, without any grinding.
Is this correct. as the seller is thinking that the sizes are different from the zooks.
cheers
Nic
Posted: Thu Aug 12, 2004 1:24 pm
by Badooky
no
not all f100 rims are the same
f100 standard rims (6") have to small a center to fit over the lip on zook hubs
f100 sunrasia types (7"+) fit
f150 i believe are 6 stud (i may be wrong)
cj jeep rims fit (5 on 5.5??)
tj jeep rims dont (5 on 5 or 4.5 i think??)
i still have two sets in the for sale section that i know fit (one set of 4, on set of 5 all 15x7s)
Posted: Thu Aug 12, 2004 1:32 pm
by nicbeer
Sweet, thanks brett.
Any chance anyone has the diamater in mm for these. Mostly the F100 7" and the cj.
cheers
Posted: Thu Aug 12, 2004 2:32 pm
by bigsteve
F150 should be the same, the only difference I have seen are the already mention f100 6 inchers.
Posted: Thu Aug 12, 2004 3:12 pm
by christover1
bigsteve wrote:F150 should be the same, the only difference I have seen are the already mention f100 6 inchers.
the f250 is definately 6 stud, big ugly truck looking rims...not sure of the the f150....but there is a difference between 2wd and 4wd f100...I think its the 2wd with the smaller hub hole (no front hubs to stick out maybe) christover
Posted: Thu Aug 12, 2004 4:23 pm
by Badooky
i think f150 is six stud and f250 and f350 are 8 stud
probably right on the f100 2wd and 4wd
Posted: Thu Aug 12, 2004 7:11 pm
by 85zook
Any chance anyone has the diamater in mm for these. Mostly the F100 7" and the cj.
im sure you can work out what 15 inches is in mm!!
Posted: Thu Aug 12, 2004 7:29 pm
by nicbeer
the hub not the wheel.
cheers
Posted: Thu Aug 12, 2004 7:50 pm
by nicbeer
Can someone please measure they spare 15x7 rim for me.
I have measurements(sp) of 85mm dia of hub hole and 85 between holes. This is from the seller.
The pic below should help I think.
cheers all.
Posted: Thu Aug 12, 2004 7:53 pm
by nicbeer
I will try again as that is not the image I posted.
Hmmmm, I think the server has issues with pic linking if it the same name.
cheers
Posted: Thu Aug 12, 2004 9:08 pm
by Badooky
mine are about 107mm in the hub opening and ~85mm stud to stud
Posted: Fri Aug 13, 2004 6:59 pm
by nicbeer
Just some information for you all.
I went out and checked some 15x7 f100 rims out and there have a smaller hub hole. About 85mm.
They were same offset and hole spacing as zook as well.
These were off a 79' f100 4wd.
Just letting ya all know.