Page 1 of 1
radius arm spacer kit
Posted: Thu Aug 12, 2004 7:56 pm
by da60
Our new toy has 2 inch lift and 33 mtr's, the front on lock and flex rubs and the back on flex rubs, if i fit the radius arm spacers this will fix the front prob i think, or i was thinking of fitting a 30m spring spacers all round, can someone tell me the benefits and drawbacks of both?
Posted: Thu Aug 12, 2004 8:01 pm
by bazzle
12mm spacers on the front work very well.
Ive got some here somewhere.
Bazzle
Posted: Thu Aug 12, 2004 10:15 pm
by A1
Just get the 12mm spacer kit of CHEEZY to give the required clearance ...................i myself with 2" body n bout 3.5" springs with the spacers fitted supplied by CHEEZY RACING i cleared 37"s
keep ya centre of GRAVITY as low as possible ...............my truck is pretty tall with 5" springs 2" body n 37"s .................should of prob just left the first set of coils in n modded my suspension to suit that lift ...............i have to get used to side angles after gettin out of a mildly lifted zook n into this setup
Dan