engineers in s/e qld
Posted: Mon Feb 24, 2003 8:51 pm
does anyone know of any good engineers on the sunshine coast or north brisbane to get a certificate done?
any idea what they charge?
any idea what they charge?
Page 1 of 1
Posted: Mon Feb 24, 2003 9:47 pm
richard found a good one in new farm i think
Posted: Mon Feb 24, 2003 11:22 pm
depends on what you want done
Modification rules and charges have no preset costings set by the DOT unlike the safety certificates
Some people charge you per mod to be complicanced
some charge full price for the first and 15-20 bucks per mod after that, some charge you well above and beyond for the sheer fact they are putting pen to paper and expose themselves to litigation..
I've worked at a couple of mod stations and they all vary in price and service..
Modification rules and charges have no preset costings set by the DOT unlike the safety certificates
Some people charge you per mod to be complicanced
some charge full price for the first and 15-20 bucks per mod after that, some charge you well above and beyond for the sheer fact they are putting pen to paper and expose themselves to litigation..
I've worked at a couple of mod stations and they all vary in price and service..
Posted: Mon Feb 24, 2003 11:52 pm
Any suggestion as to some 4wd friendly ones?
I doubt whether killalux whill be able to get those rear springs engineered with those homebuilt hangers - opinions punchy?
I doubt whether killalux whill be able to get those rear springs engineered with those homebuilt hangers - opinions punchy?
Posted: Tue Feb 25, 2003 7:30 am
Try this guy.
Bruce Johnston - 0413 137 201
I havent actually got this guy to certify anything that I have done but I was in the process of doing so.
He was going to certifty my bobtailed tray back range rover with the d44s under it (but then I cut it all up and built something different). He was very realistic and nothing much seemed too impossible which is all you can ask for in a engineer IMO.
Spoke to him about certifying a rover body swap onto a rangie chassis and he thought that was simple to do also.
This is the guy that certified the Mercedies body onto a stretched international scout chassis and running gear thats getting around brisbane.
So just call him and tell him exactly what you want to do or have done cause nothing is beyond him.
Sam
Bruce Johnston - 0413 137 201
I havent actually got this guy to certify anything that I have done but I was in the process of doing so.
He was going to certifty my bobtailed tray back range rover with the d44s under it (but then I cut it all up and built something different). He was very realistic and nothing much seemed too impossible which is all you can ask for in a engineer IMO.
Spoke to him about certifying a rover body swap onto a rangie chassis and he thought that was simple to do also.
This is the guy that certified the Mercedies body onto a stretched international scout chassis and running gear thats getting around brisbane.
So just call him and tell him exactly what you want to do or have done cause nothing is beyond him.
Sam
Posted: Tue Feb 25, 2003 10:00 am
ring this guy and see what can be done as well..
all the hot rodders talk about him...he might be lax
he does lots of mofified car stuff so anything is possible. He'll aprasie each vehicle as it comes and not just put them all into the same ideal of a shitbox and can it.
Light vehicle certifications
John Kean
0409 627 336
mod plates for cars trucks bikes
brake qand steering certification
ON SITE INSPECTION SERVICE !
brisbane area only i would say
all the hot rodders talk about him...he might be lax
he does lots of mofified car stuff so anything is possible. He'll aprasie each vehicle as it comes and not just put them all into the same ideal of a shitbox and can it.
Light vehicle certifications
John Kean
0409 627 336
mod plates for cars trucks bikes
brake qand steering certification
ON SITE INSPECTION SERVICE !
brisbane area only i would say