Outer Limits 4x4 Board

Ok finally gonna get some energy and hook up the rear maxi
I didnt want to hook it up straight away as i think it would take the challenge out of everyday weekend drivin at ormeau

One Question is in regards to the vacume storage cylinder, the line that feed the cylinder from the manifold.... where do i splice it into on the manifold ? ? ? so it can be feed with the pressure

A pic with it circled or something would be of great assistance thanks



Anthony

Hi.
I spliced into the booster vaccuum line on my rangie. Just got a T piece and some other reduction fittings and bingo.
Hope this was of some help.
Cheers
Giles

Ok I figured i would need a tpeice and thats all ok but can you give me an idea which/where the booster line is

OK I dont think you should be doing this if you dont know where the booster is on yours Anthony!!
Its under the bonnet joined to the inlet manifold by a 3/8 rubber hose.

scweet