My pump has just starting leaking out the side where the metal hose end is screwed into the pump and even though i tighten it it still p#ss's fluid out the fitting. Is there some kind of seal or copper washer in the joint ?
Hose is in good condition but cant stop the fluid flow.
Nick.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
POWER STEERING PUMP
Moderator: Micka
POWER STEERING PUMP
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
I had the same issue with mine - having read about pouring some Brake fluid there, I did that when my set-up was leaking (put in around 100ml) and now its working fine. Miracle 
...seems teh brake fluid allows for teh seals to expand somewhat, thereby elluding leaks
...seems teh brake fluid allows for teh seals to expand somewhat, thereby elluding leaksLR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Who is online
Users browsing this forum: No registered users and 0 guests