The 3F in my middy won't run at less then about 2100 when on a steep uphill climb. this is a real bitch on a loose surface & it's starting to give me the sheets. Any Ideas ?? Carby float problem or do you think it needs a surge tank?
Mick_N_Sal
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3F in MWB has fuel Prob on hillclimbs
Moderators: toaddog, Elmo, DUDELUX
Re: 3F in MWB has fuel Prob on hillclimbs
Mick_n_Sal wrote::bad-words: The 3F in my middy won't run at less then about 2100 when on a steep uphill climb. this is a real bitch on a loose surface & it's starting to give me the sheets. Any Ideas ?? Carby float problem or do you think it needs a surge tank?
Mick_N_Sal
Are you getting any indication of rich or lean conditions? ie black smoke or high temps? What about steep downhill - any probs?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
The engine is indeed stock, There is a set of extractors and a new exhaust system on the horizon though.
The vehiclee has no probs on steep downhills, it doesn't give any indications of other problems. when confronted with a steep uphill - if you keep into it there is no problem, but if you need to crawl up it tries to die. Have to keep the revs to about 2100RPM. I haven't started looking too closely yet, just thought I'd ask if it sounded familiar.
Mick_N_Sal
The vehiclee has no probs on steep downhills, it doesn't give any indications of other problems. when confronted with a steep uphill - if you keep into it there is no problem, but if you need to crawl up it tries to die. Have to keep the revs to about 2100RPM. I haven't started looking too closely yet, just thought I'd ask if it sounded familiar.
Mick_N_Sal
Im here for the sausage!
t
Sounds familiar to me!
my 2F does the exact same thing.
and once it does stall on a big hill, it takes a little bit to kick it over again.
are you sure that it isnt just the fact its a carby engine and it doesnt like steep uphills???
my 2F does the exact same thing.
and once it does stall on a big hill, it takes a little bit to kick it over again.
are you sure that it isnt just the fact its a carby engine and it doesnt like steep uphills???
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
It could just be that it's a carby engine ... been a while since i've owned one, but it's a real sheet when your 90% up up a long loose steep climb and it decides to die. Even struggles to reverse key start under these conditions.
If the problem is carby & long steep incline don't mix - why will it run fine if I keep the boot in ??
Mick_N_Sal
If the problem is carby & long steep incline don't mix - why will it run fine if I keep the boot in ??
Mick_N_Sal
Who is online
Users browsing this forum: No registered users and 1 guest