Page 1 of 1
37's?
Posted: Wed Aug 25, 2004 10:58 am
by bogged
what mods have people done to run 37's?
EG 4inch lift, and 2inch body with guard trim?
Posted: Wed Aug 25, 2004 11:07 am
by Daisy
4 inch heavy duty springs.. close to 5 inch..
40mm body lift.
runnin 36x13x16 swampers with still plenty of room in wheel arch.
37s easily acheivable with minimum guard cutting.. such as losing the flares and goin flexis etc
TOM
Posted: Wed Aug 25, 2004 11:16 am
by bogged
GQ wrote:4 inch heavy duty springs.. close to 5 inch..
40mm body lift.
runnin 36x13x16 swampers with still plenty of room in wheel arch.
37s easily acheivable with minimum guard cutting.. such as losing the flares and goin flexis etc
TOM
yea daves dad is runnin 36's with 3inch lift, but Im wondering how much of a guard trim he really has done!
Posted: Wed Aug 25, 2004 3:01 pm
by Link
I have a 5" lift with 37's.. The front guards are trimmed prob a bit more than an inch most of the way round, and 2" towards the rear.. Rear half is now a trayback so not an issue..
Posted: Wed Aug 25, 2004 6:23 pm
by MKPatrolGuy
bogged wrote:GQ wrote:4 inch heavy duty springs.. close to 5 inch..
40mm body lift.
runnin 36x13x16 swampers with still plenty of room in wheel arch.
37s easily acheivable with minimum guard cutting.. such as losing the flares and goin flexis etc
TOM
yea daves dad is runnin 36's with 3inch lift, but Im wondering how much of a guard trim he really has done!
Quite a lot
Posted: Wed Aug 25, 2004 9:07 pm
by Cheezy4x4
I fitted 39.5's with only 5" lift and 2" body and a bit of trimming, Its not that hard.
Posted: Wed Aug 25, 2004 11:07 pm
by bogged
MKPatrolGuy wrote:Quite a lot
any guard left!!
Posted: Thu Aug 26, 2004 7:02 am
by bru21
i fitted 38.5 with a 7" and no body and a Lot of weight sheading style trimming - about 6" off the back of the front guards, 3" off the top.
the fact thet they hit the coil hats at close to full flex is another story,
cheers bru
Re: 37's?
Posted: Thu Aug 26, 2004 11:22 am
by morkz
bogged wrote:what mods have people done to run 37's?
EG 4inch lift, and 2inch body with guard trim?
why you going 37' bogged ?