Outer Limits 4x4 Board

Got to the point on the transplant where we r about to hook up the clutch on the zook..
Wondering how ppl have got around this??
The box that is on the 4age is hydraulic operated but the zook is cable...



Any ideas??????

Use a early 80s hiace van master cyl with bracket & pedal ,pull out your pedal box mount the hiace master & bracket to your pedal box (drill 2 x 8mm holes in the pedal box).Now cut the sierra pedal near the pivot about 2inches down then cut the hiace pedal in halve .Heres the fun bit get a piece of angle pull off the pedal rubbers,vice grip the angle to the brake pedal then vice grip the sierra pedal to the angle check the alignment tack weld the pedals together recheck the alignment trim the excess then give it a good weld refit the pedal box ,run the hardline through the firewall the hole with sticker on it is a good place ,then run the master cyl res hose through the cable hole to a remote res from watever the local wrecker has.
Its not that hard but If you need more info or pics let me know & il pull mine out
---------------------------------------------------------------
89 soft top 4agze , series 3 , calimi 5in lift ,33 12.5 mud terrains