Page 1 of 1
sierra transfer case mounts
Posted: Mon Aug 30, 2004 9:50 pm
by antt
are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?
Re: sierra transfer case mounts
Posted: Mon Aug 30, 2004 9:54 pm
by christover1
antt wrote:are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?
no, but you can interchange the members that hold the mounts. christover
Posted: Mon Aug 30, 2004 9:59 pm
by antt
thanks christover.
is it right that the 1L case is 12% lower than the 1.3L case?
Posted: Mon Aug 30, 2004 10:02 pm
by christover1
antt wrote:thanks christover.
is it right that the 1L case is 12% lower than the 1.3L case?
yes, or close to it, on high and low...mine also has 1.o diffs, so a little lower again
Posted: Mon Aug 30, 2004 10:07 pm
by antt
thanks again
now need to work out gearing with duals through a 1.3 and a 1l
Re: sierra transfer case mounts
Posted: Tue Aug 31, 2004 12:00 am
by Guy
christover1 wrote:antt wrote:are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?
no, but you can interchange the members that hold the mounts. christover
Chris I belive that only the ute 1.0 mounts are different, on the swb 1.0's the mounts are the same .. as are the brackets etc ..
Re: sierra transfer case mounts
Posted: Tue Aug 31, 2004 12:06 am
by christover1
love_mud wrote:christover1 wrote:antt wrote:are the mounts for the 2 different sierra transfer cases (1L & 1.3L) the same?
no, but you can interchange the members that hold the mounts. christover
Chris I belive that only the ute 1.0 mounts are different, on the swb 1.0's the mounts are the same .. as are the brackets etc ..
ya could be right, have never looked, but the early 1.0 litre t-case, without the 4wd light, is totally different, so that could be it, chrustover
Posted: Tue Aug 31, 2004 8:58 am
by sierrajim
The early 1.0ltr case does have different mounts to the later case with the light, I have both here.
Posted: Tue Aug 31, 2004 3:33 pm
by 85zook
Do either of the early/late 1L cases have the same mounts as the 1.3L case? Theres a 1L zook sitting about 50m from where im sitting now and it hasnt been moved in about 3 years!! Its in immaculate condition!! Time to go make an offer i reckon!
Posted: Tue Aug 31, 2004 3:50 pm
by sierrajim
the late 1.0ltr case takes the S3 gears so it has to be similar. Not sure if they are the same though.
Posted: Tue Aug 31, 2004 4:03 pm
by stumped
antt wrote:thanks again
now need to work out gearing with duals through a 1.3 and a 1l
what u workin on dude? is this for ur vit?
Posted: Tue Aug 31, 2004 4:17 pm
by 85zook
On the topic of 1L driveline components. Are the diff centres a straight swap into the 1.3L Narrow Track? I would imagine it is the same diff/axle housing? And how would it go running 1L transfer and diffs with the 1.6 EFI Vit engine and 5 speed sierra gearbox?
Posted: Tue Aug 31, 2004 7:13 pm
by zookjedi
85zook wrote:On the topic of 1L driveline components. Are the diff centres a straight swap into the 1.3L Narrow Track? I would imagine it is the same diff/axle housing? And how would it go running 1L transfer and diffs with the 1.6 EFI Vit engine and 5 speed sierra gearbox?
no the centres are different , the n/t centres and the wide track centres are interchangable , but neither is with the 1ltr diffs
Posted: Tue Aug 31, 2004 10:04 pm
by antt
stumped wrote:antt wrote:thanks again
now need to work out gearing with duals through a 1.3 and a 1l
what u workin on dude? is this for ur vit?
maybe
useless info time-> a rockhoppered vit case to an 8:1 geared sierra case gives you a 409.2:1 crawl ratio
