Page 1 of 1
Ripped my rear air locker line out
Posted: Wed Sep 01, 2004 7:11 pm
by 4sum4
My rear air locker line got snagged on my last drive and ripped out from inside the centre.do I need to take the centre out to fix or can I leave it in?
Posted: Wed Sep 01, 2004 7:52 pm
by Yarno
I guess it would depend on which bit is broken....
Re: Ripped my rear air locker line out
Posted: Wed Sep 01, 2004 8:31 pm
by RUFF
4sum4 wrote:My rear air locker line got snagged on my last drive and ripped out from inside the centre.do I need to take the centre out to fix or can I leave it in?
So you snapped the Brass Bulkhead?
If it has snapped of flush with the housing and the piece that screws in from the inside is still ok then it is possible to replace it from the outside. As long as you can get the broken piece out.
But to be certain you get it right it could be easier to pull the centre.
Posted: Wed Sep 01, 2004 10:40 pm
by OVERKILL ENG
Unless you have ripped the brass fitting out of the centre you shuld be able to be replaced with the centrre in.
SAM
Posted: Thu Sep 02, 2004 11:55 am
by bazzle
What has ripped out?
If its just the blue line pulled thru it can be reinstalled with a new olive.
bazzle
Posted: Thu Sep 02, 2004 4:31 pm
by 4sum4
Yeah Ill probably pull it out to make sure nothing got munched