Page 1 of 1
100 series CB install
Posted: Thu Sep 02, 2004 12:17 am
by Wave_nut
Just threw in a UNIDEN CB and have been finding trouble locating a good spot to feed the antenna coax through the firewall from the bull bar. Can someone please elighten me as to the best method for running the coax through?
UHF
Posted: Thu Sep 02, 2004 6:06 am
by Grasshopper
Where did you mount the UHF, I was thinking about mounting mine in either a roof or a centre console?
Posted: Thu Sep 02, 2004 7:38 am
by Wave_nut
It's mounted below my stereo head unit in the dash, I will mount it in a roof consol when the boss aproves the finance down the track though
Posted: Sun Sep 05, 2004 4:25 pm
by ROD666
not to sure about the coax but I saw a nice install on the 100scool page, guy fitted it into the sunglass holder in the roof & ran a cable for the mike down to the centre console
Posted: Sun Sep 05, 2004 4:27 pm
by ToNkA
Not a 100series, but I just drilled a hole in the firewall behind the glovebox on the passenger side as it was the least cluttered area. Used a rubber gromet and it was done.