Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo700 behind a 2f? Anyone?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 65
Joined: Tue May 18, 2004 10:27 pm
Location: Riverland S.A.

turbo700 behind a 2f? Anyone?

Post by Frostyboy »

Has anyone heard of anyone doing this? It seems logical (allowing for Toyotas gearboxes!) but I cant find anything on this conversion.If it exists, or even if it could be done.

Mark
Top
Posts: 65
Joined: Tue May 18, 2004 10:27 pm
Location: Riverland S.A.

Post by Frostyboy »

Or even a 400?
Top
Posts: 131
Joined: Sun Dec 14, 2003 9:57 am
Location: Melbourne

Post by Evan »

Wouldn't that mean an engine to tranny adaptor (ie new bellhousing) and an auto to transfer adaptor ?
Would cost a lot and be a pain to work with, may also need to change tail shaft length as well.
E
Top
Posts: 38
Joined: Wed Apr 09, 2003 7:57 am
Location: Stratford, Victoria, Australia

Post by EFI Bundera »

Speak to Marks Adaptors in Melb....

I have their MFK917 conversion from TH700R4 to Landcruiser split transfer case in my Bundera.... works great!! (Did not have to worry about an adaptor for the motor end as my Bundera is fitted with en EFI 304)....

Marks don't have your particular conversion listed on their website, however I have found them to be excellent to deal with.... worth a try....

They can be contacted on 03 9706 7669.... or via their website http://www.marks4wd.com.... or at the factory 22 Sinclair Rd - Dandenong - Vic - 3175.

Hope this helps....
Look at that.... it does fit!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 54 guests