Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tie Rod and rim.. how close too close?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 481
Joined: Fri Jan 16, 2004 2:42 pm
Location: WA

Contact:
Contact the_smoo

Tie Rod and rim.. how close too close?

Post by the_smoo »

i picked up a cheap set of 15 x 7's for a second set of tyres for the FJ40..

when fitted, the rim only clears the front tie rods by about 5 or so mm..

is that too close, ie would it affect roadworthy or anything like that?



daniel
now in Perth
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

aslong as they clear there roadworthy mine are prolly that far away from the rubber on the tie rod end but 10mm from the actuall metal if there for offorad only you could get a set of spacers to run them and run your other set onroad or pay the 60bux whatever to get the offset changed
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests