Page 1 of 1
Problem fitting IFS hub spacer Kit
Posted: Mon Sep 13, 2004 9:50 pm
by 4sum4
Got a problem with fitting the hub spacer,The spacer to rotor bolts are hitting the stub axle bolts I can get away with it by removing the spring washers But I`m pretty sure thats not normal,Its an 82 lux diff
Posted: Tue Sep 14, 2004 7:09 am
by planb
what rotors are you using ?
are they the 302mm ones ?
Posted: Tue Sep 14, 2004 11:04 am
by hophoar
mate with an 84 had the same problem. it only justs hits, you could piss the spring washers off and replace them with star washers, or take abit off the head of the bolts.
John.
Posted: Tue Sep 14, 2004 4:30 pm
by 4sum4
cool thats what i`ll try
Posted: Tue Sep 14, 2004 5:29 pm
by hophoar
Don't forget the Locktite
Posted: Tue Sep 14, 2004 9:53 pm
by 4sum4
hophoar wrote:Don't forget the Locktite
Done there in sweet fit now
Posted: Wed Sep 15, 2004 6:38 am
by hypo
send the kit back and get the holes machined a bit deeper, i woodnt wanna b takin anythin off the head of the bolt as it will make it weeker, and i dont think its a good idea 2 weeken the bolts holdin your brakes 2gether
