Outer Limits 4x4 Board

heres my effort

Looks like mine about 3 weeks ago. I cut it out and welded a plate in.

SAME as mine was must be a common place for rust put in a fabbed floor skin and then used a bitumine paint to help with future corrosion

yeah plan is to just grind it and weld a plate in it. Not really happy due to the facked both of them body mounts are fucked on the cab side, so i'll have to do somethng about them, the left mount is completely rusted through as in it aint even on the cab anymore, the right wouldnt hold very well in a crash, so just ganna fuck it all off (talking about the cab, the hassie is completely rust free)

looks okay, don’t know what you are going to do about those body mount tho......

i cut the entire floor out of my 40, and welded in a whole new section of 5 mm plate. the farkers bullet proof now. (where talking from the rear guard to the foot wells, and passenger to driver side doors)

Its making you lighter all the time!

Reddo thats hardcore!!!!!
no where near that much rust in my 40, just behind the passenger seat and small bits, speaking of which it must be time to fish oil it again, been about 10 months now.

Aza wrote:heres my effort

doesn't that come standard from Toyota like that?

Mine's worse, especially after a hammering up at Cape York, good for ventalation though.

Chris

DIRTY ROCK STAR wrote:Its making you lighter all the time!

Reddo thats hardcore!!!!!
no where near that much rust in my 40, just behind the passenger seat and small bits, speaking of which it must be time to fish oil it again, been about 10 months now.

hmm, but your 40 didnt live on a beach...... the wiring is still farked (sea water in it, so it has rusted out). But its got about a hundred acres of sheet steel in there, somewhere

in a few years im going to import a fiberglass tub from the US of A. + bonnet and gaurds, then she will be a plastic 4wd.

roc70y wrote:
doesn't that come standard from Toyota like that?

Mine's worse, especially after a hammering up at Cape York, good for ventalation though.

Chris

yes i have seen many hilux's with rust in that place, except of course the worst i have seen in that place just has to be in mine, ohh well should be fixed in no time

Aza wrote:

roc70y wrote:
doesn't that come standard from Toyota like that?

Mine's worse, especially after a hammering up at Cape York, good for ventalation though.

Chris

yes i have seen many hilux's with rust in that place, except of course the worst i have seen in that place just has to be in mine, ohh well should be fixed in no time

aaron did you never look at the hilux scott and i dragged back from the sunshine coast, it was a damn flintstone car

bubs wrote:

Aza wrote:

roc70y wrote:
doesn't that come standard from Toyota like that?

Mine's worse, especially after a hammering up at Cape York, good for ventalation though.

Chris

yes i have seen many hilux's with rust in that place, except of course the worst i have seen in that place just has to be in mine, ohh well should be fixed in no time

aaron did you never look at the hilux scott and i dragged back from the sunshine coast, it was a damn flintstone car

nope but awwww mumma sounds awesome

it aint the best but it does the job

I am going to remove my floor before mine is back on the road in a month or so. It is still sopping after 3 months sitting

yeah all thats been done with mine is grinded the floor, welded the plates and put a seal around them to try to prevent water getting in. my car will be back on the road very very soon and is a nice bright red colour, now it does look like a poser!

good job!
If i bring mine around can u plate that?

I'll give u a case of XXXX.

Cheers Chris

roc70y wrote:good job!
If i bring mine around can u plate that?

I'll give u a case of XXXX.

Cheers Chris

No.