Page 1 of 1
Help. Need Advice or idea on my Range Rover
Posted: Wed Sep 15, 2004 9:43 am
by ragin rover
Gday,
Me and my mate have put a 2 inch body lift.
Problem is that, there is four mounts inside the chassis. Think its call tie down or something. No idea.
What do i do?
Some people say, bolt it , weld it, put block in there???
Please give me as many advice or idea as much as you can.
Thanks
Mark
Posted: Wed Sep 15, 2004 9:56 am
by fightara
I'm interested to hear what others have done for this too...
Currently I have engineering packing jammed in there, however it's pretty bootie
Posted: Wed Sep 15, 2004 4:23 pm
by 80diesel4play
Extend the bolts - then re tighten.
Unless its the ones over the rear wheels - then create a spacer to suit.
also depends on the kit you bought. Some have teh extra long bolts and spacers supplied...
pics/ duh?
Mental note shoud have bought a Toyota or Nissan... I'll remind you when I bump into you at the ATM pulling out partying cash for repairs...
Posted: Wed Sep 15, 2004 10:01 pm
by Bush65
Those are for seat belt achorage.
Extend the eyebolts or get some 25mm x 3mm flat bar and make 2 link plates (like link plates for roller chain) to extend each bolt.
Posted: Thu Sep 16, 2004 9:39 am
by fightara
I'm talking about the ones over the rear wheels.
Currently spaced with engineering packing.
Posted: Thu Sep 16, 2004 9:42 am
by RaginRover
Love that line could be a good signature
But seriously how much more fun are they to drive !!
Tom
Posted: Thu Sep 16, 2004 5:19 pm
by ISUZUROVER
Looks like you have a stalker Tom - he has stolen your identity!!!