Page 1 of 1
Rim Off-sets
Posted: Wed Sep 15, 2004 5:27 pm
by Nev62
What is the difference in the rim off-set between a Patrol and Toyota? Trying to find out which would be best for a Courier (centre hole not a issue as the courier/B2600 is smaller than the other two but stud pattern is the same).
Posted: Wed Sep 15, 2004 5:58 pm
by -Scott-
I can't remember exact figures but Toyota is significantly more negative offset than Patrol - you can see the Toyota mounting face is well inside the centreline of the rim, where Patrols are close to zero (+10?)
Scott
Posted: Wed Sep 15, 2004 7:34 pm
by Spartacus
are toyota 6 stud
Posted: Wed Sep 15, 2004 7:36 pm
by Spartacus
i gather that yota is 6 stud
do they come offset in a 5 stud hub?
dunno but is getting the wheels cut n welded illegal in QLD?
or other states?
Posted: Wed Sep 15, 2004 7:37 pm
by Rolly
patrol rims will fit. make sure they are 16" or they will foul on the rear drums.
cruiser rims are -25 and will stick out too far from your guards.
Posted: Wed Sep 15, 2004 8:05 pm
by Nev62
Rolly wrote:patrol rims will fit. make sure they are 16" or they will foul on the rear drums.
cruiser rims are -25 and will stick out too far from your guards.
Doh! Guess I would have to look at Toyota rims. The current 15"x6" stock rims mustn't go back far enough to foul the drums.
Posted: Wed Sep 15, 2004 8:36 pm
by baggers
I just bought a set of CSA 15 X 8's and was told to make sure I got a cruiser offset because they to give you a wider track. It turns out that in 15 X 8's Patrol and Landruiser rims are the same offset (mine are -24), just the centreholes are different diameters.
Also try searching the Toyota threads.