Outer Limits 4x4 Board

Hi have an 04 4.2 intercooled turbo diesel ute

Have put a 3inch exhaust on it

Anyone had the fuel pump tweaked on theres or recomend a place

West end diesel wants to high fow the turbo

But dont wana go that far there is a place in QLD (motsons)

but im in NSW

Let us no people if you can help

MYV84B wrote:Hi have an 04 4.2 intercooled turbo diesel ute
Have put a 3inch exhaust on it
Anyone had the fuel pump tweaked on theres or recomend a place
West end diesel wants to high fow the turbo
But dont wana go that far there is a place in QLD (motsons)

but im in NSW

West end is the best place to go.
High flowing will shoot your warranty in the arse instantly - maybe on the whole engine.

Motsons will probably do the same

Give AG Diesel in Melbourne a call - they also have some work done that Johnno is checking out, 20-30% more easily - 50% more with lots of $$$ spent.. But i think they are tossing the salad with 50%.. Would be impressive though.

did anyone get the above mods done?

Am going to get my done this week i.e. boost set to 15psi and fuel pump adjusted to suit is their anything else that needs doing besides the exhaust?

Because i got told i should get 30% more power it's going to be dynoed before and after. Well it's getting done thursday and i'll post up the results as soon as i get them.

cheers

morkz wrote:did anyone get the above mods done?

Am going to get my done this week i.e. boost set to 15psi and fuel pump adjusted to suit is their anything else that needs doing besides the exhaust?

Because i got told i should get 30% more power it's going to be dynoed before and after. Well it's getting done thursday and i'll post up the results as soon as i get them.

cheers

Where are you going to get work done? And $$?

bogged wrote:Where are you going to get work done? And $$?

Am going to see someone called Andrew from Diesel Tech in lilydale, he did some mods on my old disco and i was pleased with the results. He now works with Errol who owns EFI dynamics and they have their own dyno.

Charges are as follows
Check and remove injectors $70-100
clean injectors $30 each
Dyno before and after with pump mods and boost $160
Boost controller i think around $50ish yet to be confirmed

I think its pretty cheap for that price he used to work for Bosch in the diesel department he knows what hes talking about so i feel confident that the job will be done right.

cheers

morkz wrote:Boost controller i think around $50ish yet to be confirmed

I thought people said in other threads they were $100's?

bogged wrote:I thought people said in other threads they were $100's?

not sure the one i was getting was going to be a turbosmart one which we will just bleed off the waste gate its not digital or anything just something basic for tuning purposes. (i think autobahn had them for around that price also)

i will find out the price today and let u know.

Also am thinking of fitting a pyrometer for the exhuast after this am not sure when but i think i will do it.

morkz wrote:Also am thinking of fitting a pyrometer for the exhuast after this am not sure when but i think i will do it.

Well worth the $.

Ring Binskins before you do anything. He can tweak your engine in a way that you wont have to change exuast or lose your warranty. I know of blokes travelling from up here down to him for his workmanship.

ludacris wrote:Ring Binskins before you do anything. He can tweak your engine in a way that you wont have to change exuast or lose your warranty. I know of blokes travelling from up here down to him for his workmanship.

most people that i have spoken to all suggest to the exhaust which i have now done and it makes a big difference and most say no point even doing tuning mods without getting the exhuast done.

morkz wrote:
Am going to see someone called Andrew from Diesel Tech in lilydale, he did some mods on my old disco and i was pleased with the results. He now works with Errol who owns EFI dynamics and they have their own dyno.

Errol's a gun.

Stu

morkz wrote:most people that i have spoken to all suggest to the exhaust which i have now done and it makes a big difference and most say no point even doing tuning mods without getting the exhuast done.

I think its like the Yota V Nissan, Diesel/auto, petrol/diesel arguements.

I would guess Glen binskin knows his shit, watchin Outback challenge vids that blue shorty fuckin rocks.

Will see how you go with this lilydale dude, I know that Stu (hillbilly) mentioned that he was gooderer at it and his GU Ute goes quite well.

yeah i know Errol's gun but he only does petrol stuff this other guy andrew does all the diesel and alot of comp guys use him because of what JPC (mark) charges.

But saying that just about every comp truck is tuned by mark

Well i have used this guy before and he did a great job on my disco picked the power from 28kw :( (rear wheels front was discon) and with a tune only (no boost) it when to 53kw i know the figures are low but in my opionion its huge increase.

well i'll ask for a copy of the dyno sheet and i'll post it up thursday

I have a gq 4.2 with safari tubo. ihad boost put up to 13psi, fuel pump adjusted and then dyno. bhp went from 110 to 130,tourque went from 320 to 546 nm only cost $450. ihave 3inch exaust no mufflers just straight pipe and a snorkel.sounds great.

muddies wrote:I have a gq 4.2 with safari tubo. ihad boost put up to 13psi, fuel pump adjusted and then dyno. bhp went from 110 to 130,tourque went from 320 to 546 nm only cost $450. ihave 3inch exaust no mufflers just straight pipe and a snorkel.sounds great.

where did you have the work done?

I haven't persued the AG Deisel one any further. Mate had his dyno tuned there, cost a few $$ and not happy at all with the results. Another mate had his tuned at JPC and was very happy with them, some gains, better econ and quite cheap

how much was JPC??

There is a company down here in Wagga wich does a complete turbo kit etc, I watched as the patrol was on the dyno, it was well above 600 nm, I cant remember what power figgers but it was full on. This was with out any mods to pump or fuel, this was just the turbo installation..

I can PM the company details if you like..

Casey..

kc_ksom wrote:There is a company down here in Wagga wich does a complete turbo kit etc, I watched as the patrol was on the dyno, it was well above 600 nm, I cant remember what power figgers but it was full on. This was with out any mods to pump or fuel, this was just the turbo installation..

I can PM the company details if you like..

Casey..

Denco Diesel?? www.dencodiesel.com
I hope to fuck thats who you mean.

I had it done at brisbane turbo and tuning at the gabba . dont know if that is any good for u