Outer Limits 4x4 Board

Hi this is my first post so, here goes. I would like to locate a Pto Winch to suit a 94 GQ TD 4.2 , I will need the whole thing.

Pete,
I'd also post this in the Wanted Section, more exposure there.

welcome to the board pete

this is my first post to, but as far as i know you cant run the PTO shaft past the dump pipe from the turbo, others may know more, but i am pretty sure it cant be done

Hi Pete
I would suggest contacting Powerauto (spelling??) in Melbourne. You could buy a new PTO setup from them ($4000+) they are very helpfull. The pto bit (not the winch bit) is no longer made for Nissans according to some suppliers i spoke to, so it is just what shops have in stock.
I tried finding a second hand one for a while and had no luck. If you see one second hand i would suggest grabbing it, or let me Know or both. :D There was one for sale a few months ago near melbourne for only $800, but it was snapped up very quickly.
Good luck.

Snatchy

Hi again, I found one in the trading post here NSW, so I took the day off work and drove straight there to Look/buy.
My jaw dropped because it is a thomas big ass winch still mounted to a massive steel bumper,power auto PTO, 35LTR hydraulic resevior,hydraulic pump that is run from the PTO shaft lines to the hyd motor on the winch, a up/down hyd selector for a big hyd ram and the line, the only thing missing are the mount plate for the pump and the big ram but I don't need that because mine is a wagon not a tray like it came off. Got the lot for $1000.00 with a guarantee if the PTO box didn't suit my box I could return the lot. But it is the exact right box. I spoke the new bloke for powerauto can get his number if some ones intersted he might still have some boxes, and he is really helpful too.