Page 1 of 1
New clutch
Posted: Fri Mar 07, 2003 9:27 am
by 2car
Just picked up my new clutch/Flywheel. It's a 2f clutch and friction plate fitted to a 168T Chevy flywheel. Had the flywheel drilled and machined to take the Toyota clutch. Also had the flywheel and clutch balanced for good measure. $450 including the complete clutch kit.
The clutch has given me trouble since I bought the car (FJ40) and this should finally solve the problems. When I bought the car I used the clutch problem to beat the guy down on price, so thats kinda paid for the work I had done.
Posted: Sat Mar 08, 2003 10:44 am
by 2car
Friction Plate. This thing is WAY beefier than the Chev clutch I chucked out. The Damping springs are doubled up ie. one inside the other, and the facing material is spiral wound with moulded-in grooves. Wikkid!
Posted: Sat Mar 08, 2003 10:51 am
by 2car
Flywheel machined by Danny at Berco in Mitchell. Nice work.
Posted: Sun Mar 09, 2003 7:52 pm
by 2car
Lining it up with an input shaft from an old gearbox.
Posted: Sun Mar 09, 2003 7:55 pm
by 2car
Adapter, fork and hydraulics sorted. Transmission goes back in next weekend.
Posted: Sun Mar 09, 2003 7:56 pm
by 2car
Adapter, fork and hydraulics sorted. Transmission goes back in next weekend.
Posted: Sun Mar 09, 2003 7:58 pm
by 2car
Adapter, fork and hydraulics sorted. Transmission goes back in next weekend.
Posted: Sun Mar 09, 2003 8:01 pm
by 2car
Adapter, fork and hydraulics sorted. Transmission goes back in next weekend.
Posted: Sun Mar 09, 2003 8:04 pm
by taziiy
yeah we got that one already
Posted: Sun Mar 09, 2003 8:05 pm
by RUFF
So tell us again what are you doing next weekend?
Posted: Sun Mar 09, 2003 8:21 pm
by 2car
RUFF wrote:So tell us again what are you doing next weekend?
Yo Momma!
Posted: Sun Mar 09, 2003 8:25 pm
by 2car
Stupid thing kept telling me that it was too soon to post again, so I kept trying. Can someone please delete the excess posts.
TIA
Ben