Page 1 of 1
ZF Auto dimensions
Posted: Mon Sep 20, 2004 12:58 pm
by auto_eng
Can anyone tell me the dimensions of a ZF Auto rear shaft? I am after the specs for the section that goes into the LT230 transfer. Diamter, # teeth, tooth depth, length.
I am also after the length of the rear extension housing of the ZF.
Cheers
Re: ZF Auto dimensions
Posted: Mon Sep 20, 2004 4:19 pm
by Strange Rover
auto_eng wrote:Can anyone tell me the dimensions of a ZF Auto rear shaft? I am after the specs for the section that goes into the LT230 transfer. Diamter, # teeth, tooth depth, length.
I am also after the length of the rear extension housing of the ZF.
Cheers
The zf uses a short spud shaft to adapt to the lt230. So are you after the specs of te ZF by itself or with the spud shaft bolted to the zf output?
Sam
Posted: Mon Sep 20, 2004 5:02 pm
by auto_eng
After spud shaft dimensions. I am trying to see if I can get an LT230 to mate to a Toyota A340 (Crown) automatic gearbox.
My mistake, I thought the ZF mounted straight to the LT230.