Outer Limits 4x4 Board

Guys,

can anyone tell me what the spline count is on the Spline of the transfer case input to the back of the gearbox, ( so basically where the transfer and box connect together, wan to know the pline count on the transfer spline.

On a 40 series or 60 series transfer case......

hope this makes sence

screwy

The 3 speed transmission output shaft usually has 10 splines. The 4 speed if mated to a one piece transfer, 16 splines. The 4 speed and 5 speed mated to the 40 or 60 split transfer, 19 splines.

Cheers,
Dave

So for the standard 40 and 60 series 4 and 5 speed manuel box, the 1 peice transfer has 16 splines?

screwy

The 5 speed is always mated to the split transfer, so the output is always 19 spline. But the 4 speed is either mated to the split or the one piece, so either 16 or 19 spline.

Dave

ok sweet thanks for that, now i can see if i can fit it to something else

screwy