Page 1 of 1
landcruiser shock into rocky
Posted: Sun Sep 26, 2004 1:59 pm
by Spartacus
has anybody done this change?
i think they may be too hard since they made for a 2 tonne ute
mate comin to check if they fit so just askin if anyones done it.
Posted: Mon Sep 27, 2004 8:17 pm
by lay80n
They will be valved much stiffer than a rocky shock id guess. Check the lengths exctended and compressed, then flex up ya rig and measure the distance between the shock mounts. That will tell ya if they will limit travel or not. I cant remmeber what type of attachment the cruisers use sorry, so i not sure if they will fit the standard shock mounts.
Layto....
Posted: Wed Sep 29, 2004 5:50 pm
by Spartacus
75 was the same pin to eye style,
however the shock was at full compression to fit in the space
of the old one.
also the pin part on the bottom was to big to fit on the mount.
will give them another go when i get lift
Posted: Sat Oct 02, 2004 8:09 pm
by Spartacus
ended up with supersh*t shox.
gettin spring pack reset at superior on thursday.