Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Grease Nipples

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 517
Joined: Fri Mar 12, 2004 9:04 am
Location: Bathurst

Grease Nipples

Post by lowndsie »

Hey how does everyone grease up the uni joints on the drive shafts? theres about four of them but the nipples are angled so that it's near impossible to get the gun in there. I tried turning the shaft for a better angle but to no avail.
Posts: 184
Joined: Wed Jul 16, 2003 2:08 pm
Location: Melbourne

Post by icebreaker »

I usually just use my mouth... Seems to work for the misses..

Oopps.. Wrong Nipples.. D'oh ;)
'94 Daihatsu Feroza II SX
'00 KawasakiZX6R
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Initially you might have to remove the driveshaft to access the nipples, as they can block with crud and make it difficult to pump with grease, then once they are cleared, you should be able to grease them with the shaft rotated enough to give you straight access. if the grease is just pumping out the side of the gun head, you might have a faulty seal in the gun head.
Built, not bought.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

I remember my mechanic told me the Feroza's require some sort of special attachment for the grease nipples (?)
David
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

Not my tits... I just slide a hard, lube filled standard gun in there and shoot a load until it oozes out of the sides...


:roll:
On boooooost!!
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Croz wrote:Not my tits... I just slide a hard, lube filled standard gun in there and shoot a load until it oozes out of the sides...


:roll:


Whatever floats your boat! :D

I suppose I should do mine sometime- how often should they be done?
David
Posts: 517
Joined: Fri Mar 12, 2004 9:04 am
Location: Bathurst

?

Post by lowndsie »

I thought the nipples talk might get a mixed response.....

think i'll just get some 90 degree nipples and screw them in. doesnt look like mine has ever been done....
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Re: ?

Post by rOd »

lowndsie wrote: 90 degree nipples and screw them in. ..


No champagne?

:D :D :D
Dont expect mere proof to sway my opinion.
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

Wow... a thread about hard, 90 degree nipples... lets get some pics up here!! :D
On boooooost!!
Posts: 228
Joined: Mon Oct 06, 2003 11:18 pm
Location: 800 meters above sea level!

Post by Muddy999 »

I tried the 90 degree ones on my Rocky and tossed them going back to the 45 degree ones. When the shaft is still on it is a PITA with the 90 degree ones if the thread is not just quite right...

Muddy
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

WELL I ONCE........................... NAH BETER NOT IN FEAR ILL GET BANNED FROM OUTERLIMITS IF I START.

TITTY TIME :P :cool:
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests