Outer Limits 4x4 Board

Posted: **Wed Sep 29, 2004 9:02 pm**

HOW HARD IS IT TO REPLACE KINGPIN BEARINGS? ANY TIPS? ANYONE WANNA DO IT FOR ME? ILL SUPPLY THE BEER/BOURBON

Posted: **Thu Sep 30, 2004 10:58 am**

it's not very hard to do. i done mine about 6 months ago. it took me several hours to do one side cause i was cleaning everything so it was spotless and learning how everything worked. the other side didn't take half the time to do :cool:

if i was in melbourne i'd coem and do it for ya

Posted: **Thu Sep 30, 2004 9:12 pm**

any special tool needed? wanna do it this weekend.

Posted: **Thu Sep 30, 2004 11:31 pm**

Check these links:

http://www.ih8mud.com/tech/birf-repack.php

and with pics

http://www.birfield.com/~morgan//tech/axle/index.html

have you pulled your front end apart before?
it is not that hard a job just take your time and lay it all out in the order you take it off - zook shouldn't be much different to cruiser

unfortunately can not offer help am starting new stuff this weekend
you can pm me if you want to talk through it

cheers scott

Posted: **Fri Oct 01, 2004 8:18 am**

easy job to do, have you got a gregory's work shop manual? if not go get one, first one will always take longer but by the time you get to the other side you'll fly through it. and once you have done it 3 or 4 times you'll be able to do it with your eyes shut

i used to have a zook that was in need of constant attention. learnt alot from it though, but also the reason i sold it

Posted: **Sat Oct 02, 2004 7:35 pm**

ILL HELP IF YOUR KEEN TO COME UP HERE FOR A TRIP?

ALWAYS KEEN TO MEET O/L PEOPLE...AND HELP ZOOK PEOPLE ....

NOT THAT HARD........A HAMMER AND PUNCH IS WHAT YOU NEED TO GET EM OUT.....

THE IDEA IS TO DO ONE HUB AT A TIME...
(DISSASEMBLE IT..YOU CANT REALLY STUFF ANYTHING...AND YOU WILL LEARN) ONE BIT AT A TIME..AS YOU PULL IT APART LAY THE PARTS IN THE ORDER YOU PULLED EM.THE PARTS WILL GO BACK IN ONE WAY ONLY IF YOU DO THIS...

IF YOU CANT REMEMBER HOW SOMETHING WENT CHECK ON THE HUB YOU HAVE NOT PULLED APART YET....

Posted: **Sat Oct 02, 2004 10:54 pm**

went and got the bearings this morning from suziworld $16.50 each. was expecting more. prob is i aint got any time to do it at the moment as im off to bathurst on tuesday night. (not taking the zook. would take too long to get there) so it looks like being the weekend after. would still like someone thats done it b4 to help out if even to just tell me how inperson. If anyone can help ill supply some drinks and food for their time.

mud4b

i wouuld love to take it up to ya but the fuel cost would send me broke. The weber is working ok but is still a bit thirsty coz it aint been on a car for 10 years and is in desparate need of a reco kit and smaller jets.

Posted: **Sun Oct 03, 2004 11:49 am**

NOT GOOD.....

if you cant find anyone to help ill be here so give us a yell and ill talk you through it..

Outer Limits 4x4 Board

KING PIN BEARINGS ON A ZOOK

KING PIN BEARINGS ON A ZOOK