Page 1 of 1
where to find camber bolts?
Posted: Tue Oct 05, 2004 10:38 am
by SiKiD_01
does anyone know where i can get camber bolts for my vitara front struts?
i know there sus specialists like pedders, but its too expensive. i don't believe they should be that much.
thanks for any help.
Posted: Tue Oct 05, 2004 10:57 am
by roadrunner
Bloke who put in my camber bolts ( pedders ) said it was possible to modify the holes in the strut that the original bolts go through to allow you to get some adjustment...................
but I don't know effective this would be.
Posted: Tue Oct 05, 2004 10:58 am
by cj
Why do you want bolts when you're apparently 100% dodgy
just get your drill and open the holes up a little to give you some adjustment....can't get any cheaper than that
Posted: Tue Oct 05, 2004 11:03 am
by Gonzo
How do these actually work?
Posted: Tue Oct 05, 2004 11:06 am
by cj
They are a cam bolt. Gives a couple of degrees adjustment either way.
Posted: Tue Oct 05, 2004 11:35 am
by Gonzo
got a pic etc?
Posted: Tue Oct 05, 2004 11:53 am
by cj
http://www.spcperformance.com/PerfPartSect/PerfPart_EZCam.html I put them on mine with the OME suspension and 20mm coil spacers and it allowed my camber to be within factory spec.
Posted: Tue Oct 05, 2004 4:18 pm
by SiKiD_01
ha ha ha.....
i just spent my life savings to get 31"s on my vitara, now for the tyres to wear out before i get my money's worth, just isn't practical at all through a tight a$$ budget, well actually, no budget!
i heard elongating the holes isn't good, as the bolt(s) move when you go off roading. probably ok on road, unless you hit a gutter.
and its never accurate either, but what do i care right? just have a look at my B/L!
oh well, see how it goes. thanks again.