Page 1 of 1
Crank seal and timing
Posted: Wed Oct 06, 2004 4:30 pm
by Ridealldayrideallnight
G'Day All
I know there's a heap of posts regarding the crank seal leak, I assume thats the oil leak from my G13A, Was wondering if anyone knows aproximately how much it will cost to get these Seals and the Timing chain replaced, And if anyone can suggest a good (and Cheap) mechanic in Melbourne perhaps specilising in Suzuki.
Thanks for any info
Posted: Wed Oct 06, 2004 5:15 pm
by stumped
i got 3 seals (crank, cam, + rear t-case output flange seal) for less than $20 and the timing belt for around the same i think... yet to do it, but the boys tell me it's a pretty easy DIY job... if ya get a mechanic to do it there's not much they can stuff up really
Posted: Sat Oct 23, 2004 12:09 pm
by The Master
How the heck do you get the timinng belt pully off the crankshaft.
It is evil.
Cheers.
Carl
Posted: Sat Oct 23, 2004 12:50 pm
by redzook
The Master wrote:How the heck do you get the timinng belt pully off the crankshaft.
It is evil.
Cheers.
Carl
ha ha it got me to
any one got any secrects
Posted: Sat Oct 23, 2004 1:01 pm
by roadrunner
Posted: Sun Oct 24, 2004 3:00 pm
by stumped
jam the flywheel in place using a solid screwdriver or something, and use a breaker bar on the pully... bit dodgy i know, but it worked on friday
Posted: Mon Oct 25, 2004 1:31 am
by possum hunter
roadrunner wrote:http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=26366&highlight=crankshaft+seal
If you're game
Has always worked for ne with no dramas!!!!
Posted: Mon Oct 25, 2004 6:59 pm
by lay80n
roadrunner wrote:http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=26366&highlight=crankshaft+seal
If you're game
Dont laugh, this is done by mechanics ( myself included) when in a hurry.
Layto....