Page 1 of 1
Wheels from other trucks fit Paj?
Posted: Sat Oct 09, 2004 12:01 am
by Begbie
I see a lot of tryes for sale on rims, which is essential if I wanna buy a set just for the bush i guess. Rims from whcih trucks will have a matching stud pattern? and correct offset so i can hvae easy fitting.
Be some time before i can afford any suspension mods...
Posted: Sun Oct 10, 2004 9:10 pm
by StephenF
Nissan GQ or GU rims will fit Gen 2 Pajeros. They are 16 X 8. But you may need a suspension lift and wind up the front torsion bars to fit anything larger than 31's. It all depends on which model you have got.
Cheers
Stephen
Posted: Sun Oct 10, 2004 9:15 pm
by Gonzo
i have 5 15 inch older steel wheels from a paj that you can have for free, if you pick them up in syd
Posted: Tue Oct 12, 2004 5:56 pm
by pickle
Run 32s BFG All Terrains on mine that came off a 60s series cruiser.No problem with the offset but you need a lift for them not to rub.
Dave
Posted: Wed Oct 27, 2004 8:04 pm
by Begbie
Will 31s off a cruiser work without a lift?
I just cant afford to do it all at once, and have found some cheap wheels and tyres for sale.
Posted: Thu Oct 28, 2004 1:45 pm
by awbeattie381
my 31s on cruiser rims fit my NG without any problems.
Posted: Thu Oct 28, 2004 2:15 pm
by Begbie
awesome thanks mate - seem to have found some cheapie 31s on cruiser rims (200ish) So i may as well have a crack
